*Adopts lever structure, has good impermeability and durability
*Balance double seat design, than the average hydrophobic body small volume and large displacement, large displacement field and can play a more advantages
*Equipped with air discharge valve, can prevent air blocking and steam vapor lock
*All the components are installed on the valve body, valve need not removed from the piping can maintenance, easy and convenient
*Adopts lever structure, has good impermeability and durability
*Balance double seat design, than the average hydrophobic body small volume and large displacement, large displacement field and can play a more advantages
*Equipped with air discharge valve, can prevent air blocking and steam vapor lock
*All the components are installed on the valve body, valve need not removed from the piping can maintenance, easy and convenient
lever steam trap darwings
Spare parts and materials
No. | Spare parts | Materials | No. | Spare parts | Materials |
1 | valve body | WCB | 11 | support cap | 304 |
2 | Hexagon nut | 35# | 12 | stem | 304 |
3 | hexagon bolt | 35# | 13 | seal cover | 304 |
4 | PTFE | PTFE | 14 | float ball | 304 |
5 | PTFE | PTFE | 15 | hexagon bolt | 304 |
6 | support | 304 | 16 | Rotating block | 304 |
7 | bonnet | WCB | 17 | Limit block | 304 |
8 | Meter screws | 304 | 18 | Connecting block | 304 |
9 | Seal seat | 304 | 19 | Spring washer | 304 |
10 | inner hexagon screw | 304 | 20 | hexagon nut | 304 |
Model |
DESCRIPTION |
|||||
Valve type |
CS41H |
|
|
|
Free floating ball type |
|
CS11H |
|
|
|
|
Free floating ball type |
|
JX58H |
|
|
|
|
Lever float type |
|
JX88H |
|
|
|
|
Inverted bucket |
|
Connection type |
F |
|
|
|
Flange type |
|
H1 |
|
|
|
Butt welding type |
||
H |
|
|
|
Plug in welding |
||
S |
|
|
|
Internal screw thread |
||
Size |
DN |
|
|
DN15-DN500 |
||
pressure |
PN |
|
PN10-PN64 |
|||
LB |
|
150LB-600LB |
||||
K |
|
5K-40K |
||||
material |
WCB |
WCB |
||||
CF8 |
Stainless steel |
|||||
Sample: |
Lever ball float type steam trap biggest advantage is not affected by pressure, temperature, condensation water flow fluctuations, continuous drainage, water line, the minimum temperature of 0 DEG C, can make the heating equipment to achieve the best efficiency; lever ball float type steam trap valve seat total in the level below, forming a water seal, no leakage of steam; the minimum working pressure 0.01Mpa, the maximum back pressure rate is less than or equal to 85%; with internal exhaust device, lever ball float type steam trap valve adopts the most advanced membrane components for automatic air discharge valve can automatically exclude non condensable gases, very sensitive, work quality is high, service life long. The trap design has balanced two seat structure, can achieve a large displacement of small size, especially for large heating equipment and heat transfer station equipment, gas drainage resistance, large heating equipment of choice for steam traps.
The use of double valve valve hole, the valve core in the valve opening pressure is relatively reduced, resulting in large displacement. When the change of the float with the liquid level of the valve cavity on the floating lever to open or close the valve seat. Because the seat seal hole is formed below the water level, water, natural gas separation, to no leakage of steam.