TYP910 Labyrinth control valve
*Resistance to cavitation, flashing, cavitation resistance, corrosion resistance, resistance to erosion
*Low noise, no vibration
*Throttling is separated from the seat sealing surface, effectively protect the seal face
*Ultra high strength material HRC70 5. Balanced valve core, valve dynamic stability is good
*Linear sealing, leakage quantity is in accordance with ANSI grade B16.104 VI
*Combination of three seal
*Resistance to high temperature and high pressure difference
*Convenient maintenance
*Super wear-resistant packing
*Resistance to cavitation, flashing, cavitation resistance, corrosion resistance, resistance to erosion
*Low noise, no vibration
*Throttling is separated from the seat sealing surface, effectively protect the seal face
*Ultra high strength material HRC70 5. Balanced valve core, valve dynamic stability is good
*Linear sealing, leakage quantity is in accordance with ANSI grade B16.104 VI
*Combination of three seal
*Resistance to high temperature and high pressure difference
*Convenient maintenance
*Super wear-resistant packing
| SIZE | DN25-500mm |
| Nominal pressure | PN10-PN42Mpa |
| Body | straight, Angle |
|
Model |
Introduction |
|
|
TYP910 |
||
|
Valve type |
TYP300 |
CV3000 type |
|
TYP900 |
forged steel sleeve type steam trap valve |
|
|
TYP910 |
forged steel labyrinth control valve |
|
|
TYP920 |
forged steel cascade throttle control valve |
|
|
FIG580 |
2 ways control valve |
|
|
FIG680 |
3 ways control valve |
|
|
FIG681 |
3 ways bellows sealing control valve |
|
|
JX480 |
slide valve |
|
|
Actuator |
A |
single spring diaphragm type |
|
B |
multi-spring diaphragm type |
|
|
C |
single action piston |
|
|
C1 |
double action piston |
|
|
D |
electric |
|
|
F |
electric-hydraulic |
|
|
E |
manual |
|
|
G |
pneumatic-hydraulic |
|
|
H |
other |
|
|
Open/Close type |
1 |
air to open type |
|
2 |
air to close type |
|
|
3 |
electricity to open |
|
|
4 |
electricity to close |
|
|
Action type |
A |
direct action |
|
B |
reaction |
|
|
Handwheel |
1 |
without handwheel |
|
2 |
top mount the handwheel |
|
|
3 |
Side mount the handwheel |
|
|
Connection |
F |
flange |
|
H1 |
butt welding |
|
|
H |
socket |
|
|
S |
internal thread |
|
|
S1 |
external thread |
|
|
J |
wafer type |
|
|
K |
other |
|
|
Valve trim structure |
1 |
shut-off valve |
|
2 |
sleeve single seat valve |
|
|
3 |
sleeve double seat valve |
|
|
4 |
porous type noise reduction cage |
|
|
5 |
labyrinth cage |
|
|
6 |
multistage depressurization type cage |
|
|
7 |
other |
|
|
Valve core structure |
A |
balanced internal parts |
|
B |
unbalanced internal parts |
|
|
Valve bonnet type |
1 |
standard type |
|
2 |
cooling fin type |
|
|
3 |
lengthen type |
|
|
4 |
bellow type |
|
|
5 |
clamp cover type |
|
|
6 |
other |
|
|
Flow characteristic |
1 |
quick opening |
|
2 |
linear |
|
|
3 |
equal percent |
|
|
4 |
fixed percentage |
|
|
Valve seat material |
1 |
RPTFE |
|
2 |
alloy steel |
|
|
3 |
cemented carbide |
|
|
4 |
tungsten steel |
|
|
5 |
other |
|
|
Norminal diameter |
DN |
DN15-DN500 |
|
Norminal pressure |
PN |
PN10-PN760 |
|
LB |
150LB-2500LB |
|
|
K |
5K-60K |
|
|
Material type |
1 |
WCB |
|
2 |
WC6 |
|
|
3 |
WC9 |
|
|
4 |
CF8 |
|
|
5 |
CF3 |
|
|
6 |
CF8M |
|
|
7 |
CF3M |
|
|
8 |
A105 |
|
|
9 |
F91 |
|
|
10 |
F22 |
|
|
11 |
other |
|
|
Illustraton |
||
|
1、TYP300-B-1-A-2-F-2-A-1-3-1-DN50-PN25-CF8 |
||
|
1.CV3000 series，Multi-spring diaphragm cylinder,air to open type,direct action,top mount the handwheel,sleeve single seat valve,balanced internal parts ,standard valve bonnet,equal percent type,RPTFE valve seat,norminal diameter DN50,norminal pressure PN25,CF8 material. |
||
|
Model |
Introduction |
|
|
TYP300 |
||
|
Valve type |
TYP300 |
CV3000 type |
|
TYP900 |
forged steel sleeve type steam trap valve |
|
|
TYP910 |
forged steel labyrinth control valve |
|
|
TYP920 |
forged steel cascade throttle control valve |
|
|
FIG580 |
2 ways control valve |
|
|
FIG680 |
3 ways control valve |
|
|
FIG681 |
3 ways bellows sealing control valve |
|
|
JX480 |
slide valve |
|
|
Actuator |
A |
single spring diaphragm type |
|
B |
multi-spring diaphragm type |
|
|
C |
single action piston |
|
|
C1 |
double action piston |
|
|
D |
electric |
|
|
F |
electric-hydraulic |
|
|
E |
manual |
|
|
G |
pneumatic-hydraulic |
|
|
H |
other |
|
|
Open/Close type |
1 |
air to open type |
|
2 |
air to close type |
|
|
3 |
electricity to open |
|
|
4 |
electricity to close |
|
|
Action type |
A |
direct action |
|
B |
reaction |
|
|
Handwheel |
1 |
without handwheel |
|
2 |
top mount the handwheel |
|
|
3 |
Side mount the handwheel |
|
|
Connection |
F |
flange |
|
H1 |
butt welding |
|
|
H |
socket |
|
|
S |
internal thread |
|
|
S1 |
external thread |
|
|
J |
wafer type |
|
|
K |
other |
|
|
Valve trim structure |
1 |
shut-off valve |
|
2 |
sleeve single seat valve |
|
|
3 |
sleeve double seat valve |
|
|
4 |
porous type noise reduction cage |
|
|
5 |
labyrinth cage |
|
|
6 |
multistage depressurization type cage |
|
|
7 |
other |
|
|
Valve core structure |
A |
balanced internal parts |
|
B |
unbalanced internal parts |
|
|
Valve bonnet type |
1 |
standard type |
|
2 |
cooling fin type |
|
|
3 |
lengthen type |
|
|
4 |
bellow type |
|
|
5 |
clamp cover type |
|
|
6 |
other |
|
|
Flow characteristic |
1 |
quick opening |
|
2 |
linear |
|
|
3 |
equal percent |
|
|
4 |
fixed percentage |
|
|
Valve seat material |
1 |
RPTFE |
|
2 |
alloy steel |
|
|
3 |
cemented carbide |
|
|
4 |
tungsten steel |
|
|
5 |
other |
|
|
Norminal diameter |
DN |
DN15-DN500 |
|
Norminal pressure |
PN |
PN10-PN760 |
|
LB |
150LB-2500LB |
|
|
K |
5K-60K |
|
|
Material type |
1 |
WCB |
|
2 |
WC6 |
|
|
3 |
WC9 |
|
|
4 |
CF8 |
|
|
5 |
CF3 |
|
|
6 |
CF8M |
|
|
7 |
CF3M |
|
|
8 |
A105 |
|
|
9 |
F91 |
|
|
10 |
F22 |
|
|
11 |
other |
|
|
Illustraton |
||
|
1、TYP300-B-1-A-2-F-2-A-1-3-1-DN50-PN25-CF8 |
||
|
1.CV3000 series，Multi-spring diaphragm cylinder,air to open type,direct action,top mount the handwheel,sleeve single seat valve,balanced internal parts ,standard valve bonnet,equal percent type,RPTFE valve seat,norminal diameter DN50,norminal pressure PN25,CF8 material. |
||
Labyrinth disc plate multi-stage decompression structure is as shown in figure 3, its core throttling parts is composed of multiple metal platters with labyrinth grooves. After many collisions and turning point during flowing through the labyrinth runner, fluid consumes energy, the flow rate is under control while decompression process step by step.
It’s widely used in high temperature and high pressure special occasions ,like nuclear power, power stations and other industries , working medium mostly is superheated steam, also can be liquid medium. Its characteristics are as follows.
1) Bend class of labyrinth runner is the decompression class of labyrinth regulator, generally can be up to more than ten to twenty classes. So labyrinth multi-stage decompression structure is the strongest in common multi-stage decompression regulator, some foreign products can up to 40 40MPa.
2) Excellent resistance to cavitations erosion and anechoic anti-vibration performance, multistage bend labyrinth runner can effectively control the fluid flow rate, avoiding cavitations, noise and vibration, etc.
3) Labyrinth regulator can achieve different flow characteristic adjustment curve by combining different forms of labyrinth disc.
4) Labyrinth disc requires high accuracy of manufacturing, generally is surfacing satellite, which makes it has longer service life, simple installation and maintenance, easy to replace plate.
5) Labyrinth runner requires high cleanliness to the fluid medium, or clog will happen easily.
